|
We offer a variety of in-house manufactured accessory dress up
parts for your Austin Healey. Most of our parts are made of a quality grade of
stainless aluminum or copper. They are polished to a brilliant finish and can
easily be installed giving your Austin Healey that 'classic' look.
If you are interested
in buying anything, call 260-347-5304 or email askfrank@wickerizedhealey.com.
Click on any picture
to enlarge!
Tie Down Hooks
 |
These tie down hooks
resemble the 'original style' for the front and what we think they should look
like for the back. The two front hooks mount to the bumper bracket to frame
bolts and the back two mount to the rear spring u-bolts. They are made out of
steel and are epoxy primed and painted a satin black. They fit all big healeys
100-4 thru BJ8.
1 set of 4 tie down hooks
$29.95 +Shipping Currently Out of
Stock |
 |
These tie down hooks are
'our own design' and have a more sleeker look. The two front hooks mount to the
bumper bracket to frame bolts and the back two mount to the rear spring
u-bolts. They are made out of steel and are epoxy primed and painted a satin
black. They fit all big healeys 100-4 thru BJ8.
1 set of
4 tie down hooks
$29.95 +Shipping
Currently Out of Stock |
Cold Air
Boxes
 |
The alloy cold air boxes
fit a 4 cylinder Austin Healey 100-4, BN1 & BN2 motor. It was original on
the 100-4M Austin Healey. They are made of 1/8 aluminum and are built to the
factory's dimensions.
Polished Aluminum
$159.95
+Shipping Currently Out of
Stock |
 |
The alloy cold air boxes
fit a 4 cylinder Austin Healey 100-4, BN1 & BN2 motor. It was original on
the 100-4M Austin Healey. They are made of 1/8 aluminum and are built to the
factory's dimensions.
Brushed Aluminum
$139.95
+Shipping Currently Out of
Stock |
 |
The alloy cold air boxes
fit a 4 cylinder Austin Healey 100-4, BN1 & BN2 motor. It was original on
the 100-4M Austin Healey. They are made of 1/8 aluminum and are built to the
factory's dimensions.
High Gloss Black Finish
$139.95 +Shipping Currently Out of
Stock |
Healey Hood & Trunk Rods
Our Healey hood and
trunk support rods are made of stainless steel and have been wheel polished.
They come with mounting hardware, which is a stainless steel washer and cotter
pin and are very easy to install.
 |
We offer a hood & trunk
kit for BN4 thru BJ8 4-seater Austin Healeys. This kit includes a hood rod,
trunk rod, trunk-lid support, spare tire rod, and a spare tire rod bracket.
Hood & Trunk Kit
$105.95
+Shipping Currently Out of Stock
|
 |
Spare Tire Rod Bracket - BN4 thru BJ8 4-seater
$9.95 +Shipping Currently Out of Stock |
 |
Trunk-Lid Support - BN4 thru BJ8
$9.95 +Shipping Currently Out of
Stock |
 |
Hood Rods - BN1 & BN2
$29.95 +Shipping
Currently Out of Stock
Hood Rods - BN4 thru BJ8
$29.95 +Shipping Currently Out of
Stock
Trunk Rods - BN4 thru BJ8
$29.95 +Shipping Currently Out of
Stock |
 |
Spare Tire
Rod - BN4 thru BJ8 4-seater
$32.95 +Shipping
Currently Out of Stock |
 |
Hood Open Rods - 100-6 thru BJ8
2 pieces
$39.00 +Shipping Currently Out of
Stock |
Engine Heater Pipes
 |
Engine Heater Pipe fits a 6
cylinder engine for a 3000. Our Heater Pipes are made of aluminum and has been
wheel polished to a brilliant finish.
Engine Heater
Pipe - Aluminum
$59.95 +Shipping Currently Out of
Stock |
 |
Engine Heater Pipe fits all
100-4, BN1, & BN2. Our Heater Pipes are made of aluminum and has been wheel
polished to a brilliant finish.
Engine Heater Pipe
- Aluminum
$59.95 +Shipping Currently Out of
Stock |
 |
Engine Heater Pipe fits all
100-4, BN1, & BN2. Our Heater Pipes are made of copper and has been wheel
polished to a brilliant finish.
Engine Heater Pipe
- Copper
$59.95 +Shipping Currently Out of Stock
|
Front Bumper License Plate
Bracket
 |
Our Front Bumper License
Plate Bracket mounts to the bumper bolts, so there is no need to drill any
holes in your front bumper. It is made out of stainless steel, epoxy primed and
painted a satin black. Fits all big healeys BN1 thru BJ8.
Front Bumper License Plate Bracket
$29.95 +Shipping
Currently Out of Stock |
back |
)
)
)
)
)
)
)
)
)
)
)
)
)
)